Model 4800-D Dry Ingredient Dispenser

 

The Model 4800-D dispenser will automatically and accurately dispense anti-cake or seasonings to exact desired percentages. Production rates are based upon up to 2% of anti-cake to shredding volume. The unit is a heavy-duty self-contained assembly consisting of a three cubic foot hopper with cover on top.

 

The ingredients are loaded into the hopper. From the hopper they flow down into the rotating agitator with the aid of an externally mounted vibrator on the hopper. The agitator assures a smooth uniform flow (breaking up any lumps) down into the auger. The Delran auger delivers the ingredients through the 46" long adjustable metering tube that discharges the last 24”. The auger is driven by a self-contained direct motor-mounted gearbox with maintenance free self-lubricating gears, permanently lubricated sealed bearings and all rubber external seals with no plastic bushings for prolonged operating life.

Johnson's Model 4800-SE Sensor Eye controls the dispensing of the ingredients as it detects the product on the conveyor entering the tumble barrel. An electronically controlled sensing system uses an electronically eye-operated switch that actually "senses" the amount of cheese on the conveyor entering the tumble barrel. The control of the electronic timing can be adjusted to delay the dispenser until the product is in the tumble barrel before dispensing starts.

A dispenser stand with stainless steel polyurethane lockable wheels are available to allow the dispenser to be removed from the tumble barrel for cleaning. This will help eliminate water from getting into the anti-cake.

 

General Specifications

Production	120 pounds per hour (6,000 lbs @ 2%)
Size	25”W X 40”H X 72” long
Weight	106 lbs
Construction	Stainless steel and Delran construction
Auger	1.25 Dia. Delran
Hopper	3 Cubic foot w/cover
Vibrator	120VAC, 1PH, 60HZ
Drive Motor	3/8 H.P. Inverter Duty
Electrical	208/ 230/460VAC, 3PH, 60HZ
Electrical Controls	Johnson's Process Control Cabinet (PCC).

 

 

FW79 Brabender Anticake Dispenser

The Brabender FlexWall® Feeder Type FW 79 feeds powders, granules, pellets, flakes,chips,fluffs,etc.with good to poor flowability.The Brabender FlexWall® Feeder consists of a stainless steel exterior housing, a feed screw for ingredient dispense, a variable speed frequency controlled three-phase current motor driving the feed screw, and a flexible polyurethane hopper activated by external massage paddles.

 

The natural ingredient flow thus induced and the full activation of the entire ingredient compartment prevent bridging and ingredient deterioration and ensure an optimum screw filling level.

To suit a variety of ingredients, three paddle agitation amplitudes can be ad-
justed. An optional separate variable speed paddle motor allows infinitely va- riable adjustment of the frequency of the paddle movement. The unique design of the Brabender FlexWall® Feeder permits easy disassembly and cleaning.

 

Specifications:

Dimensions	31” L X 31’ W X 43” H
Construction	All stainless steel housing Flex hopper with 2” Dia. X 19” Long auger
Tube
Electrical	Variable frequency drive w/current overload protection built into a Johnson Line Process Control Panel
Motor	½ H.P. 3-Phase AC, TEFC
Weight	143 lb Approximately